DHD 3.5
 |  | Flat Face Alternative design for all rock conditions especially fractured and fissured rocks and changing formations. |
 | Concave Alternative design for all rock conditions particularly deep hole drilling can improve hole alignment as a result of inverted pilot. | |
 | Convex Strong design for all conditions especially hard abrasive rock.Good balance of fast drilling and long service life. |
 | Ballistic Inserts Suitable for soft and medium compact low abrasive rocks producing large cuttings. Not suitable for badly fractured rocks. |  | Domed Inserts Strong rugged shape for high performance and good service life in all conditions particularly suitable for very hard abrasive rocks and deep hole drilling. |  | Semi-Ballistic Inserts Suitable for all soft and medium rock conditions including fractured and fissured rocks. |
DRILL BITS | ||||||||
Bit | Diameter | Face | Buttons | Over | Weight | |||
Part No | mm | inch | Design | Type | Qty/Dia | Size | (kg) | |
| Hammer - DOMINATOR 350 Hammer - DOMINATOR 375 | ||||||||
650622 | 90 | 3 1/2 | Convex | Semi-Ballistic | 13 x 11 mm | 3.8 | ||
650623 | 90 | 3 1/2 | Convex | Domed | 13 x 11 mm | 3.8 | ||
650609 | 95 | 3 3/4 | Convex | Semi-Ballistic | 15 x 11 mm | 4.0 | ||
650620 | 95 | 3 3/4 | Convex | Domed | 15 x 11 mm | 4.0 | ||
650610 | 100 | 3 15/16 | Convex | Ballistic | 15 x 11 mm | 4.5 | ||
650621 | 100 | 3 15/16 | Convex | Domed | 15 x 11 mm | 4.5 | ||
650624 | 104 | 4 1/8 | Convex | Domed | 8 x 13 mm/ 8 x 11 mm | 4.9 | ||
| AVAILABLE SHANKS | ||||||
