JET-LOK ® II

DESCRIPTION:

JET-LOK® II is a two-part epoxy with metallic fillers that can be used to permanently lock threaded connections under normal operating conditions. The eight-ounce kit uses both a new catalyst for added pot life and durability with lower toxicity and the rapidcuring conventional catalyst; making it the optimum choice for any application. It is designed for use on all threaded joints or fasteners where an exceptionally strong and durable bond is required. It is especially useful on drilling tools, casing, and other tubulars where the effective prevention of joint loosening is required.

USE:
The catalyst is emptied into the can containing the base epoxy resin, where the two are thoroughly mixed. The applicator is used to completely cover the male threads with the mixture and the joint is then coupled. The 16-ounce kit uses an amine-type hardener where the pot life of the mixture under average conditions is 50 minutes, during which time it remains in a workable consistency. The eight-ounce kit also uses a new technology hardener to provide greater chemical resistance and gives a pot life of 120 - 150 minutes. Complete cure for both occurs in 24 hours. The cure time can be reduced by elevating the temperature up to 250°F (121°C).

APPLICATIONS:

JET-LOK II is recommended for use on casing, shoes, couplings, and collars; eliminating the need for gas/ arc welding. Threadlock Kit offers a distinct advantage over welding in that threaded connections may be broken out by heating to 550°F (288°C). This product is also excellent for any application requiring a strong, permanent bond that has high vibration resistance.

ADVANTAGES:

• Complete kit
• Noncorrosive
• Economical
• Adheres to any clean surface
• Ease of application
• Prevents back-off
• Resistant to acids, solvents, & water
• Good for service up to 400°F (204°C)

PRODUCT SPECIFICATIONS:

Color - Grey
Density (lb/gal) - 15.58
Specific Gravity - 1.87
Flash Point - 430°F (221°C)
Pot Life - 75 minutes (avg.)
Maximum Exotherm - 134°F (50°C)
Temperature Stability - 400°F (204°C)
Flash Point (ASTM D-4049) - >221°C (430°F)
Friction Factor
Rotary Shouldered Connections - 0.9 - 1.0
*Noninterference (T&C) - 1.3 - 2.0

PACKAGING:

Can Size: 8oz, 16 oz